设备展示

EQUIPMENT DISPLAY

首页

拉索激光刻印、热压、切管一体机

设备由激光刻印系统、热压系统、机体、输送装置、切割装置、落料装置、安全检测装置、砂轮片切割装置、人机界面及可编程控制器等组成。设备功能及特点是通过输送装置带动产品运行到尺寸开关位置，进行激光标记刻印、套管表面热压后再进行产品切割，切断后落料装置将产品放到指定位置，计数器计数一次，重复运行到设定的产品数量，设备将自动停止运行。本设备采用步进电机控制送管速度，具有刻印标记清晰、热压效果好、切割精度高、切断端面平整、操作简单、工作效率高、性能稳定、维护方便、使用寿命长，适用于多品种、多规格长度的拉索套管类产品批量。 The equipment consists of laser engraving system, hot pressing system, body, conveying device, cutting device, blanking device, safety testing device, grinding wheel cutting device, human-machine interface and programmable controller.The functions and characteristics of the equipment are to drive the products to the size switch position through the conveying device, carry out laser marking, hot press on the surface of the sleeve and then conduct product cutting. After cutting off, the blanking device will put the products to the specified position, the counter will count once, repeat operation to the set number of products, and the equipment will automatically stop operation.The equipment adopts stepper motor to control the pipe feeding speed, with clear marking, good hot-pressing effect, high cutting precision, smooth cutting end face, simple operation, high efficiency, stable performance, easy maintenance, long service life, suitable for multi-variety, multi-specification and length of cable sleeve products batch.

关键词：

拉索激光刻印、热压、切管一体机

所属分类：

在线咨询：

详情描述

　　设备介绍

　　设备由激光刻印系统、热压系统、机体、输送装置、切割装置、落料装置、安全检测装置、砂轮片切割装置、人机界面及可编程控制器等组成。

　　设备功能及特点

1、通过输送装置带动产品运行到尺寸开关位置，进行激光标记刻印、套管表面热压后再进行产品切割，切断后落料装置将产品放到指定位置，计数器计数一次，重复运行到设定的产品数量，设备将自动停止运行。

2、本设备采用步进电机控制送管速度，具有刻印标记清晰、热压效果好、切割精度高、切断端面平整、操作简单、工作效率高、性能稳定、维护方便、使用寿命长，适用于多品种、多规格长度的拉索套管类产品批量。

　　加工范围

　　产品加工外径：Φ4～15mm

　　产品加工长度：100～6000mm

　　产品加工精度：±0．5mm

　　产能：≥600

Equipment is introduced

The equipment consists of laser engraving system, hot pressing system, body, conveying device, cutting device, blanking device, safety testing device, grinding wheel cutting device, human-machine interface and programmable controller.

Functions and features of the equipment

1. Drive the product to the size switch position through the conveying device, carry out laser marking and engraving, and cut the product after hot pressing on the surface of the sleeve. After cutting, the blanking device will put the product into the specified position, the counter will be counted once, and the equipment will stop running automatically after repeated operation to the set number of products.

2. The equipment adopts stepper motor to control the pipe feeding speed, with clear marking, good hot-pressing effect, high cutting precision, flat cutting end face, simple operation, high efficiency, stable performance, easy maintenance, long service life, suitable for a variety of types and specifications of the length of the cable sleeve products batch.

Processing range

Product processing diameter: Φ 4 ~ 15 mm

Product processing length: 100 ~ 6000mm

Product processing accuracy: ± 0.5mm

Capacity: 600 or higher