设备展示

EQUIPMENT DISPLAY

座椅泡沫开孔机

全自动座椅泡沫压缩生产线,泡沫开孔生产线由真空开孔系统、机械碾压系统和修补传送带控等组成。 Fully automatic seat foam compression production line, the foam opening production line consists of vacuum opening system, mechanical rolling system and repair conveyor belt control.

关键词:

汽车座椅泡沫加工

所属分类:

在线咨询:

详情描述

2.1设备组成
泡沫开孔生产线由真空开孔系统、机械碾压系统和修补传送带控等组成。
2.2工作原理
真空开孔原理 
    泡沫产品放置于传送带上时,传送带自动将产品送入真空箱规定的位置,传送带停止,真空箱盖下降到位,真空阀打开始抽真空,当达到设定的值后,停止抽真空并保持真空度一段时间,保持时间到达,开始释放真空到指定真空度,继而进行抽第二次真空,如此反复多次真空段(真空段次数可调)。完成最后次时释放所有的真空,真空箱上升回位,传送带启动运行,将产品送出真空箱,至此,该产品的真空开孔动作全部完成。
机械碾压原理
泡沫产品放置于下层滚筒斜坡上,通过无动力斜坡滚筒传送至下层传送带,下层输送带传两旁的无动力滚轮自动将产品位置调整到规定规范,并将产品送入碾压区域,产品先通过第一段机械开孔碾压,待产品完全经过第一段碾压后,再进入第二段机械开孔碾压,经过两段碾压后将产品送出。

2.1 Equipment composition

The foam hole opening production line is composed of vacuum hole opening system, mechanical rolling system and repairing conveyor belt control.

2.2 Working Principle

L Principle of vacuum opening

Foam products placed on the conveyor belt, the conveyor belt automatically send products to the position of the chamber evacuation rules, the conveyor belt to stop, vacuum box cover fall in place, vacuum valve began pumping air into vacuum state, after reaching the set value, stop and keep the vacuum vacuum for a period of time, keep time, begins to release the vacuum to the specified vacuum, then carries on the second vacuum, so repeatedly vacuum adjustable number (vacuum).Release all the vacuums at the last time, the empty box rises and returns, the conveyor starts to run, and the product is sent out of the empty box. At this point, the vacuum opening action of the product is completed.

L Mechanical rolling principle

Foam products are placed in the lower roller slopes and by unpowered slope transfer roller to the lower conveyor belt, the lower the unpowered roller automatically on both sides of the conveyor belt transmission products position adjustment to the rules, and the product into the roller compaction area, product by the first paragraph the machine first opening roller compaction, after being products completely after the first period of RCC, again into the second period of mechanical opening roller compaction, send the product after two rolling.

相关设备


图片名称

在线咨询

提交留言