设备展示

EQUIPMENT DISPLAY

钻扩孔机

设备配置是由钻扩孔机由机体、夹持装置、推进装置、选择电机及可编程控制器等组成。设备功能及特点是通过夹持气缸将工件夹紧后,推进气缸将旋转钻头推进到工件孔中实现钻扩孔功能,延时后自动复位并松开。该机设计巧妙,工作效率高,故障率低,使用寿命长,互换性强,维护方便。     Equipment configuration is composed of drilling and reaming machine body, clamping device, propulsion device, selection motor and programmable controller.The functions and features of the equipment are as follows: after the workpiece is clamped by the clamping cylinder, the pushing cylinder pushes the rotary drill bit into the workpiece hole to realize the function of drilling and reaming. After the delay, it will automatically reset and loosen.This machine design is clever, work efficiency is high, failure rate is low, service life is long, interchangeability is strong, maintenance is convenient.

关键词:

钻扩孔机

所属分类:

在线咨询:

详情描述

  设备介绍
 
  ■设备配置
  
  钻扩孔机由机体、夹持装置、推进装置、选择电机及可编程控制器等组成。
 
  ■设备功能及特点
 
  1.通过夹持气缸将工件夹紧后,推进气缸将旋转钻头推进到工件孔中实现钻扩孔功能,延时后自动复位并松开。
 
  2.该机设计巧妙,工作效率高,故障率低,使用寿命长,互换性强,维护方便。
 
  ■加工范围
 
  适用产品:直丝管
 
  产品外径:Φ5-12mm
 
  (更换产品,需更换夹持块,导向套与钻头钻)
 
  孔深度:最深60mm(深度改变需调节限位螺栓)

Equipment is introduced

■ Equipment configuration

  Drilling and reaming machine is composed of body, clamping device, propulsion device, selection motor and programmable controller.

■ Equipment functions and features

1.After the workpiece is clamped by the clamping cylinder, the propelling cylinder pushes the rotary bit into the workpiece hole to realize the function of drilling and reaming. After the delay, it will automatically reset and loosen.

2.This machine design is clever, work efficiency is high, failure rate is low, service life is long,interchangeability is strong, maintenance is convenient.

■ Processing range

Applicable product: straight wire pipe

Diameter of products: Φ 5-12 mm

(To replace the product, the clamping block, guide sleeve and drill bit shall be replaced)

Hole depth: the deepest 60mm (limit bolt needs to be adjusted for depth change)

相关设备


图片名称

在线咨询

提交留言