设备展示

EQUIPMENT DISPLAY

涂油穿线机

设备介绍   ■设备配置    涂油穿线机由机体、加紧装置、推进装置、注油装置、送线电机及可编程控制器组成。   ■设备功能及特点   1.通过加紧装置将钢丝绳加紧后,启动注油装置和送线电机,最后启动推进装置带动钢丝绳移动,完成整条钢丝绳的涂油穿线工作。   2.本设备采用可编程控制器设计,操作简单、工作效率高、故障率低、易于维护,适用于汽车、摩托车拉索的钢丝绳涂油或穿线及总长检查。  ■加工范围   穿线长度:0-4000mm      线径大小:Φ2.5-5.0mm      工作高度:900mm Equipment is introduced ■ Equipment configuration    The oiled threading machine is composed of the body, the tightening device, the propulsion device, the oiling device, the wire feeding motor and the programmable controller. ■ Equipment functions and features 1.After the wire rope is tightened by the tightening device, start the oil filling device and the wire feeding motor, and finally start the propulsion device to drive the wire rope to move, so as to complete the oiled threading work of the whole wire rope. 2.This equipment adopts programmable controller design, simple operation, high work efficiency, low failure rate, easy to maintain, suitable for automobile, motorcycle cable wire rope oil or threading and general inspection. ■ Processing range Threading length: 0-4000mm Wire diameter size: Φ 2.5 5.0 mm Working height: 900mm Capacity: 6000-8000 pieces/shift

关键词:

涂油穿线机 可编程控制器

所属分类:

在线咨询:

详情描述

  设备介绍
 
  ■设备配置
  
  涂油穿线机由机体、加紧装置、推进装置、注油装置、送线电机及可编程控制器组成。
 
  ■设备功能及特点
 
  1.通过加紧装置将钢丝绳加紧后,启动注油装置和送线电机,最后启动推进装置带动钢丝绳移动,完成整条钢丝绳的涂油穿线工作。
 
  2.本设备采用可编程控制器设计,操作简单、工作效率高、故障率低、易于维护,适用于汽车、摩托车拉索的钢丝绳涂油或穿线及总长检查。
 
  ■加工范围
 
  穿线长度:0-4000mm
  
  线径大小:Φ2.5-5.0mm
  
  工作高度:900mm
  
  产能:6000-8000件/班

Equipment is introduced

 

■ Equipment configuration

  

The oiled threading machine is composed of the body, the tightening device, the propulsion device, the oiling device, the wire feeding motor and the programmable controller.

 

■ Equipment functions and features

 

1.After the wire rope is tightened by the tightening device, start the oil filling device and the wire feeding motor, and finally start the propulsion device to drive the wire rope to move, so as to complete the oiled threading work of the whole wire rope.

 

2.This equipment adopts programmable controller design, simple operation, high work efficiency, low failure rate, easy to maintain, suitable for automobile, motorcycle cable wire rope oil or threading and general inspection.

 

■ Processing range

 

Threading length: 0-4000mm

 

Wire diameter size: Φ 2.5 5.0 mm

 

Working height: 900mm

 

Capacity: 6000-8000 pieces/shift

相关设备


图片名称

在线咨询

提交留言